Separate names with a comma.
my avatar picture is my old 999r with a marvic Penta Mag front wheel and standard forged rear, it helped speed up the steering in my view.
they are very nice, but man they are heavy... for the garage its ok though
I have his peg stands ( Geetech) and also a front lifter. Great quality, but service could be better, but to be fair i think he is running this...
check the battery cables for corrosion, and the earthing points as well. the ECU needs an Earth , and i have seen pictures of corrosion between...
Thanks for the Tip Dazz ill drop them a line to see if they can have a look at it for me. Also regarding the Screen, its a GIVI-LCR version i...
in any circumstance of route cause analysis, my first question is 'what has changed', and as you have just renewed the belts that would be my...
first i would do is check the cam timing marks line up, as if it wasn't doing this before, then the inlet valve is opening/ closing slightly off...
cheers Mr C, i guess then that a trim-able rod is included in the kit? or just threaded for adjust ability. any chance of a picture of the shift...
i guess the following should be checked- Fuelling, Air filtration, Timing ( cam or ignition) and/ or valve clearances. in no particular order.....
I am also interested in you feedback, thanks gents. as I was looking at this add on for the Rb Evo that i have on the 1199, how was the mechanical...
Motul Motocool Organic + is what is recommended by my local dealer, and what i use in the panigale.
ultimately its just a number.. 70 Mph.. set by someone who never asked you it it was the number you liked.. gladly, living in Germany, i ride the...
out in the middle east, all the cars we get have a speed alarm at 120 kph, and im sure most rental cars in the UK/EU will have some thing similar...
i got mine off of Ebay, i guess that might be the best bet.
funnly my 996 did the same, i thought it was the head bearings, but they were fine.. never got to the bottom of it
I experienced a similar issue with a 996 and found the internal pipes/hoses were porous, and with a full tank the effect was reduced, but with the...
is there a difference with a full or almost empty tank? what its the inside of the tank like? as it sounds like a mixture issue, and if its...
Thanks Mordor, i will have a look at that once the bike is running happy.. also Alpha tech has a Blanking plate for the module to remove the heavy...
so back to work for a few weeks and i think a small update is due.. engine refit etc went without hitch, just a realisation that the previous...
another vote here for the BMC panel filter kit, i used them on my 996s as i had previously used the sock filters and had had experience of the...
