Separate names with a comma.
I got one similar to this for my previous Multistrada, it also fits the Supersport and all other Ducatis with the same hub. [ATTACH]
I've never used aliexpress before but I thought I'd give then a go for one of these for my Scrambler. The price listed was £11.14 so at that price...
A few years back when I had the ST4s I fitted pair of Chinese riser clip ons. They'd been on for a week or so then one daay when I was maneuvering...
If you have an Android phone ScanM5X is your friend. You will also need a Bluetooth OBD adaptor and a Ducati 3 pin to 16 pin OBD adaptor, both...
As far as I know.
The Pantah doesn't have a threaded bush. The spindle goes right through with a nut at the LH fork with clamps at both fork legs.
The flanges on the bottom pulleys should keep the belts in line. If they are running off something is out of true. The tensioner pulleys is where...
I mind the brakes fine. The front was almost non-existant and the back one would lock up at anything more than a light touch. Mine had an...
My first proper bike that I passed my test on was an Ariel Arrow Super Sport just like that. It wisna a bike that I took to.
I think I'd prefer the Manx to the C10 though, although it has made it up the Lecht.
No electronics on my 1948 BSA ZB32. It will even run without a battery, dynamo for lights and magneto ignition. [ATTACH]
Since no one seems to want this it will be going for scrap.
Easy way to check which cylinder is misfiring is to start it from cold and run the engine for about 15 seconds. Then cautiously feel the exhaust...
Loctite Bearing Fit might provide a solution.
That was exactly the problem I had.
I should add, it will fit all models from 2010 to 2014.
I have a modified brake pedal left over from the 1200 Multi that I used to have. The foot pad has been cut off and welded back on about 25mm...
In 2017 I needed a change of bike having had my 1200MTS for 5 years and around 30,000 miles. At a Ducati demo day I tried the MTS 950 and the...
Check fuses No 2 and No 6 and ,silly though it might seem, is the kill switch in the RUN position?
First thought was the fuel pump relay but since the starter button does nothing I'd suspect possibly an issue with the supply to the ECU. Have you...
