Separate names with a comma.
To get the cams out of the ST2 you will need to remove the cam pulley which needs special tools to remove the nut and hold the cam wheel and the...
The studs are screwed into the cylinder head, M8 if I remember. The nuts have a very small hex at 10mm so they round off very easily when they get...
For these sort of jobs I use a junior hacksaw, or sometimes if access is it gives better access a dremel with a cut-off disc. Cut a slot in the...
It is all to do with homologation. Whether it the beam pattern is satisfactory or not has nothing to do with it :(
Yes, not true at all. The bike in question had just been rebuilt so it's not surprising that it took some time for the oil to reach the rockers....
No, I found it when checking the valve clearances. I'd removed the cams to check the rocker surfaces. Flaking rockers are not common on the 2v...
That's a guaranteed certainty.
I'm sure they are but by the time he's bought the whole set it will be quite expensive for a one off job. And there is also the difficulty of...
And these are only the numbers. What about ZDM, S and *
Nearly 20 years ago I had a 900SS that suffered from the common cracked frame. After a lot of correspondence with Ducati UK they agreed to replace...
There is nothing available for the Supersport but if you have plenty of cash you can buy a USB drive from Ducati covering all the models from...
Cool running is a complaint with nearly all water cooled Ducatis. This mod should be doable on most that use the the same thermostat, which is...
Nothing would surprise me about that.
I'm perfectly happy with that. Having driven many bikes over the years that had headlights little better than red hot nails I will happily fit...
[ATTACH]
WTS05 and WTS09 have identical characteristics apart from the ther 09 being shorter. I doubt if that would make little if any difference, so...
Now there's a thought. Many years ago a lorry with a load of fish waste (I've no idea where it was going) lost it's load on a sharp corner in the...
The engine temperature is the same as the coolant temperature sensor fitted to many other Ducatis. It is also the same as on the Fiat 1.2 8V MkII...
The oil temperature sensor fitted into the oil screen plug simply sends a signal to the oil temp gauge but the engine temperature sensor in the...
This might help.
