Separate names with a comma.
Correct :upyeah:
Not so recently - since 1989 https://www.camelvalley.com/about
And with Brexit the Dublin agreement also ended. So the UK can no longer send the immigrants back to EU countries but can only send them back to...
Work brought three of my good friends who are English to live in Scotland then they came to realise how badly Scotland is treated by the UK...
I'm fairly sure that with the immobiliser disabled the IAW5AM will allow a start without a dash at all. You should check with @chrisw. You could...
On other Ducatis it is pressed in, I'd think the Diavel is the same. Is it wise to remove it?
Worth trying as a relay is pretty cheap, but given that the pump primes as ignition on the relay is unlikely to be the issue.
Sounds like a failed crank sensor. Do you know if the pump is running while turning on the starter?
No that's not correct - unless you disconnected the loom wires from the battery. It is best to make the positive connection after the 30A fuse. In...
You don't need to see the whole wiring diagram, the regulator is in parallel with the battery. Whatever current comes out of the regulator also...
As @Nasher says, probably to do with the regulator that they've used. It comes with a connector where there are 2 red and 2 black, probably to...
Here is a studio picture of a new one you can compare it with. [ATTACH]
The seal is 28x38x7 suggesting that the spindle diameter is 28mm.
How odd. I checked the parts lists for 999, 999S and 999R. Only the R differed. Maybe only the case for the 749S.
Well either your bike has R heads or the parts lists are wrong...
I was aware that the "R" models have a different shims from the others using tapered collets instead of half rings. I didn't know that they had...
7mm 3.15 opener now changed for 3.10 opener. https://docs.google.com/spreadsheets/d/1njZ4CLXm3VyUFK4xc_H9Zt9u9TQL44Yjcw7G8PCndqY/edit#gid=0
What are you up to now Sam? Something to do with your TT replica project?
Probably much the same. A resistive controller would generate lots of heat internally.
I don't see why it shouldn't work. It simply alters the mark space ratio between the on and off periods to vary the motor speed but that should...
