Separate names with a comma.
No! The raised teeth would hit the sensor. You set the gap against raised teeth section. Here is a pic from the S4R manual. Water cooled engine...
I've no idea what is correct for your bike, every model appears to be different. It won't do any harm to do a reset but the the throttle MUST be...
The TPS on these bikes is set by software. The throttle stop is mechanically adjusted at the factory and should not be altered. Wherever the...
With the engine at the timing position.
I don't know for your engine without looking it up, but many Ducati engines have a removable plug just in front of the cps allowing access with a...
Crank sensors have been known to fail when hot. Any DTC errors showing with Jpdiag?
I only fitted the Road 5 at the beginning of the year and due to Covid I've only managed about 1000 miles but so far it has given me every...
Well, now that the bikes are off the road for the winter. I thought I'd get round to doing something about the number plate lights. Both of them...
There are lots of alternative fixings but on these bikes it is about preserving originality.
Thanks for that :upyeah:
I have no problem with rider aids BUT more electronics is more to go wrong with expensive repairs if it does.
Will do Mike. One last question. What is the length of the originals?
That is fantastic information Mike. Thanks a lot for that :upyeah: Edit. Given your comments about the originals being very hard, I'm still...
You can also get the same result by holding the pads onto a hot disc, like when stopping at a T junction after a quick blast then holding the...
If you are successful maybe you could enlighten the rest of us?
Latest news is Ducati Manchester take over.
From the illustration it looks like the bulb is fitted into a socket that has 2 spade terminals for the wires. It may simply be a push fit but it...
This illustration is from the Owners Manual. [ATTACH] It just says : Parking light Disconnect the connections (11) from the terminals (fig.62)....
No, but with an appropriate app (e.g. ScanM5X) and a Bluetooth ELM327 it is possible read out the engine sensor parameters - rpm, engine temp, air...
You could use an IAW59M from an S4 or ST4s which would use the same sensors, injectors and a non-linear TPS but you'd need to adapt your loom to...
