Separate names with a comma.
South of Inverness what Harry says but don't go as far as Aviemore, turn off for Carrbridge. My own preference is to miss out the A9 altogether....
Going south from Thurso you don't have much alternative to the A9. if you're not bothered about John o' Groats you could cut over to Wick either...
Probably should if you want to be correct. 35Nm and the bolts are in fact M10.
Unbolts the bars and refit then with the spacers under them and with 15mm longer bolts. Can't remember the size, something like M8 x 35mm.
No, they will alter the amount of fuel being injected. Possibly much too rich or too lean to allow combustion but even then I'd expect to hear...
They should terminate in the region of the side stand unless you have a charcoal canister. Just follow them back up. Yu may have to remove the...
They are M5 x 14mm. I'm surprised that yours are rusty as they are protected to some extent by the filler cap. Is the drain hole clear and the...
Any marks on the belt have been put there as an aid by someone who replaced the belts and will be of no real help in checking the belt timing. The...
I had one off the other week. As I recall, I had to remove the panels at either side of the seat then the seat pad giving access to the single...
As posted in your thread on DuN : [ATTACH]
Yes, but are the cuts all the way through to the back?
Although the cuts extend down to the shaft at the front do they also cut through the shoulder at the rear? [IMG]
Yes, I bought it a couple of months ago. Lots of really good reading.
As you've found the horn isn't operated directly by the button but gets 12V from the dash when the horn button is pushed. The dash sends 5V to the...
