Separate names with a comma.
Yes, there is often a microswitch positioned so that it is triggered if the seat is lifted. It goes straight to the alarm wiring though and...
I 've removed many Datatool alarms but I have no idea what each wire does, as you know they are all black. If I had the time I could trace them...
Yes, that's them. I also had a minor off last year but the damage to the bike, 3 fairing panels, a ding in the tank, mirror, bar end, rider...
Good tips there. More info on what to look for in data packets would be useful. The speed sensors are 2 wire and I believe they are hall-effect...
They are Evo-Tech. I chose them because they fit to the engine mounting points and don't clamp to the frame.
Yes, the connector is under the back cover. If the dash doesn't get the both CAN line connections it wont register the speed but it most probably...
There is no BBS on the Scrambler. Both speed sensors connect to the ABS control module which is connected to the ECU and the dash by CAN Hi...
Yes, it doubles as a speed sensor for the dash and the ABS. There is one on each wheel.
Here's one I took recently: [ATTACH]
Good fix. I've used this trick in the past but bear in mind that Baking Powder is different from Baking Soda. Baking Powder is a mixture that is...
I'm sure that a Ducati diagnostic tool would help but unfortunately you're going to have to go to a dealer for that.
An internet search comes up with various possibilities; Understanding Check Engine Light Codes This information should work for any vehicle built...
A metal disc with slots in it that the speed sensor uses to create pulses at a frequency proportional to the road speed. See items 4 and 11. [ATTACH]
There is no ABS/TC calibration available on the Scrambler.
The Scramblers have a phonic wheel for the sensor.
Sorry, I've now removed the the disagree. I must have clicked it accidentally and hadn't even noticed.
That is plain wrong. Current bikes are homologated at 93dBA. Just about every bike on the road will be exceeding 73dBA. That's whisper quiet....
Yes. I had the the same issue when doing a Pantah 500 restoration. Scroll to the bottom of this page...
I think someone on the scramblerforum had a similar problem a year or two back. I'm fairly sure a new dash was required.
Not sure what bits you are referring to. From the manual; Water intake union . M30x1.5 . 25Nm Water delivery union . M22x1.5 . 25Nm Water pump...
