Separate names with a comma.
@Exige lists an IPF2 C/B @ £53.95 for the 1198. No mention of it fitting the MTS1200 nor Diavel. The parts lists should confirm.
Nice to get an easy fix :)
If you are replacing it with a new one can you not break the glass (?) then prise out the bezel before fitting the new one.
Absolutely. I'm watching the series 2nd time round now :)
It certainly sounds like a blocked breather. This is the best picture I could come up with for showing the location of the tank breather. [ATTACH]...
As I recall, most, but not all of the connectors on the ST2 are Ampliversal Superseal. The majority of connectors used by Ducati can be got from...
Who? [IMG]
Just delete the post (#36608) then.
Wrang word @finm. Fae The Concise Scots Dictionary: poochal ; puchal ; adj. Proud, self-assured, self-confident; cocky. There is also Puckle : a...
Yes, it's almost certainly an electrical issue. FYI, there is a crank position sensor which supplies the ECU with a signal that it uses to...
I'm trying to figure out how it managed to bend the valves on both cylinders simultaneously. A desmo engine won't allow valve/piston contact by...
Tacho on these bikes is electronic, getting it's signal from the ECU. You should check your charging voltage. One of the first signs of a low...
I didn't realise that you were using stainless wire, although there are specialist solders that will work with stainless. If TIG works that's...
Yes, reflashing. However the current generation of ECUs are a lot cleverer than previous versions so it is a bit of an unknown.
I have the T800 upmap on my Supersport but since the bike is now out of warranty I really don't care and wouldn't have done anyway. It's my bike...
Maybe you should ask @James - BR Special Tuning about that? As you are probably aware they are currently promoting T800 upmap for the HYP950.
You ought to learn the art of soldering cables. Those loose strands of wire at the nipple will give you grief sooner or later. Nice job your doing...
That's very reasonable. Mine was £277 for the 12 month service - £56 parts, £175 labour + vat on the total. I grudge the labour charge for...
Ha Ha! He'll be doing EC (East Coast) 300 as well.
A couple of years ago I had the same problem with my 907ie, which uses the same injection system as the 851. It ran fine at higher revs but at...
