Separate names with a comma.
It's something to do with the suspension geometry is set up.
If I remember right, resistance is around 750 to 950 ohms. Ditch it if it shows any signs of swelling. Substitution is the only real check.
Please give him my regards the next time you see him.
I'm certainly going to miss the service we had previously. H would do an exchange for me as long as the workshop had them in stock, if not they...
Yes, the warehouse shift seems to have been going on for a while. Bit worrying that Motorapido don't keep a stock of them.
Try http://www.ducatipaddy.com/page21.html for stainless nipples and pins.
Try Powerhouse Automotive - https://www.powerhouse.uk/content/motorcycle-brakes/motorcycle-brake-caliper-seal-kits.php Seal kit -...
Same part no. 55212092A
Sorry Jim, I personally have no such email but had it confirmed at the weekend by word of mouth from one of the Scottish Ducati Club committee who...
Check the individual LED's. There will be a series / parallel arrangement and one faulty LED will knock out a whole section. You can then replace...
Geoff, I've been following your 1098 rebuild thread and from the beginning you have made much mention of Langcourt without actually mentioning who...
Here you are.
Bits come up on eBay, usually way overpriced. If you want advice and possible help in finding parts get yourself onto http://ducatipaso.org/
OK single sensor. The CPS is inductive and whatever volts it gets, if any, comes from the ECU. It is 2 wire and a screen which should be at ground...
If there is power to the coils that only leaves either no continuity between each coil -ve terminals and the ECU (unlikely), the crank sensor, or...
That one usually kills the fuel pump as well.
The fuel pump and the ignition coils (and the injectors) all get power from the fuel pump relay. If the relay is operating and the pump primes...
I can get one from a bearing supplier locally. Since my nearest dealer is 100 miles away I'll have to get it sent and postage knocks the cost up...
The gearbox output shaft seal on my 907ie is leaking and I'd like to have a new seal on hand before I start work on it. Can anyone confirm the...
And what was the problem with the gear change?
