Separate names with a comma.
I'm aware of that Pete. I can understand why there is an increase in perceived risk if there is a bigger percentage of accidents or thefts in a...
Undoubtedly but they are much more expensive. That said, because they are precision made they will need changing far less often.
Admiral may or may not be increasing premiums due to speed awareness courses but what they are doing is increasing premiums of drivers involved in...
Good advice there Nelly. I find the same thing with half-rings but mainly it seems to affect the old 2V engines with 8mm valves stems and as you...
The 'checking' clearances is what they should be set to when adjusting them. The 'operation' clearances is the tolerance allowed before adjustment...
UPDATE: The injectors are Siemens - DEKA
For nothing more recent than the 1*98/848 unfortunately.
We have the Ducati part numbers, it's the Bosch part numbers for the 1200 he needs. I suspect he will be able to source them cheaper from a Bosch...
Does anyone know the Bosch part numbers for the injectors on the 1200 Monster and Supersport 939 or Monster 821 models? Or does anyone know where...
I don't think the blackening is an issue, they seem to be well soldered to the board but some of the contacts look to be a bit pitted. A clean...
Sorry, I don't know of any way of lifting the tank without removing the beak and all the panels. This picture from the wiring diagram might help...
Owners who fit Dynacoils usually use those with a 3Ω primary resistance.
I hope you managed to convince DVLA at least. Thanks for all the interesting info above.
I had the same issue on my 2010. It had started under the hugger in front of the tyre where it gets blasted by shit thrown off the tyre. It then...
Yes, but why wreck a perfectly good speedo drive that could be used for something else. The spacer was cheap, did the job neatly and didn't...
I had to work this out a few weeks ago. I was putting a bike together for a guy and he had fitted discs from an R so needed spacers behind them to...
You need part no. 714.1.045.1A. Cost from Ducati approx. £4.90 It is the front wheel spacer fitted to the following; 620S ie 800SS ie Monster...
An air leak in the exhaust will cause it to pop and bang on the overrun and the newer Ducatis with air injection all do it with the OEM exhaust.
I'm not making excuses for him but he was on his second lap and there had been a short short shower of rain at that point by the time he got round...
It should but best check on the JPdiag forum for potential problems. http://jpdiag.xooit.eu/
