Separate names with a comma.
If you can find a stockist, Berger 7011 used without a lacquer top coat is an exact match for the frame.
Hell's teeth! I hadn't seen that, although I did wonder.
The one on the left has a special shaped long handle for easier digging, the middle one is your bog standard shit shovel, the one on the right is...
Yes, these are the correct belts for a carbed 900. Also for the 900SSie, M900, ST2 and 907ie. The 1000DS engine uses a different belt.
Wrong belts?
It wasn't the thread that was seized, it was the head of the bolt inside the recess on the opposite side of the shock bearing.
I hope they have improved the attachment to the swinging arm on the DVT models, or at least greased the bolt. The lower bolt on mine was seized...
There is no bush at the top mount. It has a fork which is bolted directly to the frame with 2 plastic spacers. Last year I replaced the the bottom...
Biggest difference is the crank and alternator stator which is quite different on the i.e. Easiest way to convert a carb SS to injection would be...
I can confirm that the Auto DRL function works a treat. I was out today and twice when I went under a tunnel of trees the DRLs went off and dip...
Further investigation shows that the DRL does indeed have two brightnesses, full DRL and Park. If I turn the ignition switch to "Park" the DRLs...
The band is there to protect the tube from the ends of any spokes that protrude through the nipples, although they should have all been ground...
Well I've had the bike a week now and I'm still not fully conversant with all the functions but it definitely does not have 2 main beam lights....
On the DFDS ferries they supply ratchet straps and you tie your own bike down. A situation I'm much happier with. I tie it down using the...
Glad I've got you for a proof reader Pete. I should check what I've written more carefully before posting. :relieved: I have edited my original...
No idea, I'm about 500 miles away. But if it helps, your fault is almost certainly associated with the front speed sensor. Either the sensor...
The events described by the OP are the very reasons why I have fitted Outex sealant kits to the wheels on my Classic. A tube is basically a...
They use a tubeless tyre with tubes fitted. You can convert them to tubeless using an Outex seal kit which I have done to my Classic.
Depends on the LEDs you use. Those that use COB LEDs at the focal point of the reflector work very well. I used them on them Multi and had no...
Yes, they will do very well. Aluminium and copper are both soft metals and good for the job. Copper is more expensive but is easy to anneal for...
