Separate names with a comma.
They haven't got a very good finish to start with and rapidly turn dirty brown. I found that after polishing them they stay looking good for much...
I've never used these tools. I tighten the pinch bolts on the opposite side, torque the axle nut (30mm), then loosen the pinch bolts again and...
I bought a metal polishing kit from thepolishingshop.co.uk a couple of years ago. It was great for polishing the pipes on my Scrambler. [IMG]
Here is a drawing for spacers. The drawing shows them at 2.5mm thickness. You could use 2 per disc or simply get them made at 5mm.
Use discs from R model or standard discs with 5mm spacers?
I got it out. A fair task though. Nothing would shift it and, as I thought it would the hex rounded out. So I used an airsaw to cut through the...
I had a similar set up round the corner from where I used to live. With old, mainly untaxed, cars parked all over the place it was hard for the...
It's a manual that I downloaded a few years ago. Here is a picture of the connector on my bike (it looks horribly grimey). It is tucked in front...
According to the manual it is up near the battery. I will have a look at mine to confirm.
Apart from the sensor itself, which should be waterproof, there is a small 4-pin connector to loom tucked in among various others ahead of the...
That's what I said in post #3 above.
Thanks for the tip but I'm in NE Scotland. I'll find somewhere local to drill it out.
My 2010 has just a tad under 40,000 on it now. Apart from the cylinder heads being replaced under warranty at 21,000 it has had no other issues....
Yes, it's the ECU that has the fault. Nothing wrong with the sensor.
