Separate names with a comma.
Cleaning them with Wonderwheels alloy wheel cleaner every 2 or 3 weeks will remove the bronze colouring. Watch where you get it though. It will...
I anticipated that so scribed a line to mark the selector's position before loosening the screws.
The TPS won't make the dash reset.
Sounds more like a duff connection than a duff battery. Are you sure all the connections are clean and tight.
I'd say that 12.3v is bit on the low side. A good battery should be showing more like 12.7v. More important is what does it drop to when the...
Not the relay then. Could be related to the stand/neutral/clutch switches or the immobiliser.
I'd have thought that it's much more likely that the magnet has been broken at a service. There is nothing that it could contact in an accident....
I must get up to date on the later dash/ECU set up :rolleyes:
If it's a brand new one I'm sure there is a one-off procedure for coding it to the keys. If it's 2nd hand you are stuck with either getting the...
I now realise that by single valve shims you probably mean one shim. I thought you mean't shims for a single but since they aren't 8mm you must be...
Lacey Ducati
Not ideal I'm afraid. The pictures weren't taken with the intention of showing off the carbon. [IMG] [IMG]
Coming up to 37,000 on mine.
I carry a spare relay under the seat, just in case. I bought it as a spare for the fuel pump relay for when I was on foreign trips. It will of...
ScanM5X
The same book quotes: 1997 - 2000, 996 SPS - inlet valve = 36mm, Exh Valve = 30mm 1999 - 2000, 996 Factory - inlet valve = 39mm, Exh Valve...
Marelli IAW5AM
According to Ian Falloon's Desmoquattro Performance Handbook the 996R has a 40mm dia. inlet valve. Gudgeon pin diameter seems to have remained at...
I don't know if it helps, but I've measured the resistance of the grips on my MTS. They are 7.3Ω each. The ones on my Scrambler are 10.5Ω each...
That's handy then.
