Separate names with a comma.
Paraffin with a brush to clean the gunge off then wipe it with an old rag.
The indicators are supplied from the dash. If the dash fuse is blown there'd be more than the indictors not working. The brake light is supplied...
There is set up for the Scrambler that cuts the vacuum hose to the canister and fits a tee piece providing a vacuum feed for the Scottoiler....
Nothing to do with the canbus. It's because the power outlets (and the satnav socket) are on the switched side of the hands free relay. So when...
Good to hear it's fixed and was nothing serious and nice to know I was right. :)
It's an electroluminescent panel built into the dash. The only answer is a new dash.
The screen screws in behind the plug. Could it have been left out by a previous owner? But as you say, you never know with Ducati. I thought the...
Yes they do. It's item 19 in the parts drawing below. You use the same 14mm hex key to undo it as for the outer cover. It should catch any of the...
No the immobiliser won't cause the bike to cut out while it's running. The key/transponder is only active at switch-on.
Any update on this?
You need to get a (free) licence from JP to enable them. Paste the ECU info displayed in the JPDiag window here
And I thought it was just me :D
I beg to differ John. I had the peg cut off and welded higher on a spare damaged pedal that I had. I have also fitted SBS pads and bleed nipples...
Motomfg do one for the Hypers which also use Marzocchi forks but the told me it doesn't fit! Ducati Hypermotard "S" fork cap wrench I used a...
Fuel line came off inside the tank? That would explain the change to the sound of the fuel pump.
I wouldn't advise that as it comes pre-diluted. Any water added is going to dilute it further. You can buy a 1L bottle to top here Permanent Spezial
All recent Ducatis, and I'm sure that will include the 848/1098, have a flat cut-off. So legal in both the UK and the EU. Easy to check, just...
I have a 2010 with a full Termi system. I spent the first week of June riding about 1000 miles on a 1200 DVT. I am in absolutely no doubt that the...
530, 525, 520 all have the same pitch of 5/8". 530 is 3/8" wide, 525 is 5/16" wide (2.5 x 1/8") and 520 is 1/4" wide (2 x 1/8"). I wouldn't bother...
Something has come into contact withe pulley to cause the burring on the edge but the cause is obviously no longer there. Wonder what it was?
