Separate names with a comma.
If you're not planning to go more than 75mph, why not a Monster? Something like a 796 or is it a 795? Anyway, the (air-cooled) 803 engine with...
That link shows Copper-plated Steel self-locking nuts with steel studs. Perfect. Use Aluslip into the head and a bit of Copperslip on the whole of...
Could use Alu-slip (definitely not Copperslip - similar galvanic issues) on the head threads. Use brass nuts or the OEM/other copper-plated steel...
It's be good to do the same tests on your new CPS so you know what it gives when 'good'. Also, if your measurements match what you're getting from...
I'd pop it inside;)
These things are useful and may help in the event of a claim if there's damage. Other makes are available... [ATTACH]
No, but I live in (yes, possibly misguided) hope that the factory knows which springs are fitted to my bike as original equipment.
I asked Ducati HQ the same question about what the 'standard' spring rate is on my Hypermotard as I'd like to change the fork internals and don't...
I'd take off those masking tape labels on the outside if they're not super-low tack - it can get awfully difficult to remove once it dries out....
Haha, great! Agree all the way, and the piston rings are just one part of the whole engine/gearbox/etc system... I'm a practical design engineer...
That cat is going to great heights to get to that bird! Know the feeling...
It's a bad idea to put a Copper seal/washer on there as the galvanic action between Aluminium & Copper is 'high'. Aluminium seal/washer is required.
Which verse do you stop heating...?;) [MEDIA]
All the above are in my local (Bristol) Aldi and they have the axle stands too but no impact drivers. Picked up a couple of bargain GT85 cans too...
Agree ^^^^ Why would it move if it has been designed, made & installed properly? In order to keep it in place there needs to be friction between...
A parts or workshop manual will be a good place to track down where your exhaust-valve servo-motor connection is. Mostly available free or low...
I used the main Ducati website contact form (in English). I was pleasantly surprised to get a phone call (within a few few days) from a very...
This is such a shame. The trouble with your dealer's lack of interest and knowledge has rightly caused you to doubt Ducati. Have you contacted...
It'd be useful if you could pop in a picture of your existing screw/bolt next to a rule so we can see what the relevant measurements are. Bolts...
