Separate names with a comma.
The pump flange is just held in with a few nuts, it may need a new o-ring when re-fitting but probably not, but you will need to get ALL the fuel...
Just leave it where it is and get it out at the next service when the fuel filter is replaced, it won't do any harm. The pump intake has a fine...
To be honest I have no idea why the manufacturer specifies the gap at 0.6mm nor if it has any effect on emissions. As you say, you'd expect a more...
Ah! UpNorth. I didn't realise you were a member. :) I think Sev has answered your question about OEM gaps. With regard to the quiet clutch, I...
If you look at the your quote from Shaazam again you'll see what he means about the gap size and voltage. With "stick" coils there are no plug...
It is the fine wire electrode that enables the use of a larger gap without loading the ignition system. And just to be nitty picky. 0.7mm is...
I have the tank off to change the filter just now and out of curiosity removed the fuel sensor to see if it was sticking. I can turn it from end...
From the workshop manual... [ATTACH] Mine definitely works at more than a metre
You got that right :D
They come with 2 keys Fin, a black "active" key fob and a red "passive" key. The black key has a battery and talks to the bike from up to about...
Available from Palmer Products. £28.50 for the one piece and £42.50 for the 2 piece. [IMG]
The fuel pump not priming is another issue. Check the fuel pump relay under the seat.
Sounds like a lack of current available to the fuel pump. It probably sounds better at higher revs as the battery voltage rises which means the...
As well as upgrading the wires from the alternator I fit these Powerpole connectors [IMG]
They probably are. After 37 years I can't remember what they were. :rolleyes:
The previous owner of my 907ie had changed the belts according to the Workshop Manual, every 12,000 miles - no mention of 2 yearly then....
They had tubes. My previous 860GTS came new with Block C tyres
The picture was taken in the spring of 1979
They weren't old at the time :p If I remember right they were Metzelers, pre ME99.
If I pull mine hard the lever will just about touch the bar but in practice the wheel will lock up (well it would if the ABS didn't stop it) long...
