Separate names with a comma.
I had the first of these UK Black & Gold 900SS's. I bought it off Coburn & Hughes as an "ex-demonstrator" with about 1400 miles on it. I found out...
Cheeky fecker! I was quoting from this thread Now that makes more sense
I'm not understanding this. The original setup has a flexy from the master cylinder permanently crimped to a hard pipe to the ABS unit. From the...
yes but the £20 minimum order is a bit of a nuisance. I'd forgotten about CPC, I used to use them a lot a work.
You might find them here Car Motorcycle Harness sealed and unsealed wiring loom connectors
Really? I grew up on bikes that size and they didn't seem like minimotos to me. The Scrambler: dry weight - 176.5kg (389lbs), seat height - 31.1"...
When I had the ST4s it developed a tiny weep behind the horiz exhaust cam pulley. I traced it to the sleeve between the seal and the camshaft that...
It will have a 1/4" hex that is a universal size for all of the interchangeable bits that are available.
Clutch plates are the same both sides. There is no orientation, turning it round won't make any difference. On the OEM clutch 2 plain plates go in...
I wouldn't be so sure of that. The crankcase design changed for 1999 and the 996 drive side bearing has a different part no from the pre '99 M900...
It's OK. I Googled it - D1 b ducati slide rev03_eng and that link has a HUGE amount of information.
DMT! Never heard of that one Chris. What's it do?
Same part nos.
Yes, definitely check it out. If it's the one I think it is it would be a bad idea to connect 12v across it. Have a good break.
I may be mistaken but I'd assume that Ducati would fit a plug compatible with their charging system. It has a 2 pin plug with a male and a female...
[ATTACH] I'd reckon the ring terminals are definitely for retrofit to other models. The charger kit seems to come with a cable that will plug into...
I think they changed to 12mm bolts for 2000. For the ST series the 12mm bolts are longer and the frame is thicker at the cup where the bolts go...
It's not shown in the wiring diagram and I have an earlier bike that doesn't have one. So can't help sorry.
Wired in charging point? If you mean the power outlets, they are only active when the ignition is on. The Ducati charger connects to the...
Myself, and plenty others, have HID fitted to the low beams, Some folks have managed to fit them to both beams. AndyW's site has all the info you...
