Separate names with a comma.
That's my understanding too.
Exactly, the shoulder of the bolt tightens up against it and prevents the bolt nipping up on the brake pedal.
Is the washer (item 12) there and in the right place?
The lens isn't easily separable on these models and isn't available on it's own anyway. There are a few headlight units on eBay but make sure you...
It might help if you tell us what the bike is.
Mine too.
I'll try. [ATTACH] If you look at this picture and imagine all of the plates were in place you'll see that the pressure of the springs will be...
Yes. No harm in trying.
Ducati just released new version of Fuel Level Sensor - Ducati.ms - The Ultimate Ducati Forum
Yes, the axial load on the bearing will be quite small but the bearing should be well capable of it and yes, Steve R is correct, it means...
For about 15 sq ins of carbon! [IMG]
Last year, one of the cush drive pins on my 907 sheared. The part through the sprocket with the nut remained in place, the other bit fell into the...
Yes, but they don't always do it right Nelly. I've seen 2 SR4s Monsters where the TPS angle wasn't set correctly from the factory. One was so bad...
I've just been reading up about the Seimens ECU and you are right, the TPS does and auto-reset after 3 on/off cycles. So it looks like you'll be ok.
Hot glue gun?
The workshop manuals says to reset the TPS using the DDS "diagnostic instrument". If it self reset after 3 on/off cycles I'm sure it would say so....
As far as I know the Evo engine uses the Siemens ECU so JPDiag isn't going to connect to it. Balancing the throttle bodies shouldn't affect the...
I thought all carbon fibre was 'woven'. Maybe I'm just naive. I'd expect the glass fibre ones to be self coloured and red would the obvious one....
I suggested Diopa to someone (maybe you) on ducatipaso.org but it turned out that Diopa only do these in glassfibre for that model.
Belt & braces?
