Separate names with a comma.
This is a pic of the damage to mine below the seat. [IMG] The 2 smaller cables were under the loom, pushing it up. A bit of re-arrangement and it...
It's the throttle actuator motors for the RbW
If that wire had chafed through you could have had a real disaster. All the red wires are fed through a 30A fuse straight off the battery and are...
I had a similar damage to the loom on my 2010, under the seat. I spotted it not long after I bought the bike a year and a half ago. The cable...
When the battery volts drop the first thing to stop working is the tacho. I'd measure the voltage across the battery with the engine running, with...
There is no tilt sensor and I've never come across any Ducati with one.
If you find the connector for the clutch switch and short the terminals together you'll bypass the stand switch. If it still cuts out the stand...
Just a few observations; I've changed loads of Ducati belts over the years and the rollers invariably have a black coating on them that is...
I've no idea.
Or you could drill a new hole, bottom centre and blank off the two unused ones with blind grommets. Might look a bit naff though.
I'd be interested in this too.
Halogen lamps have a colour temperature of 3200K, daylight an average colour temp of 5600K, depending on the time of day, clear or overcast. OEM...
Good choice of bike Jamie. :upyeah: I'm just down the road from you in Forfar. Where about in the glens are you? Maybe see you about.
Don't buy an Oberon, they might as well be made of cheese. I bought this one from the US
I'm sure there will be plenty takers on here Chris.
The 2013/14 model has a 4 screw fitting for the screen. The 2010/12 models have 3.
I now have MultiTool Lite installed on my S2. It communicates with the bike through a cheap ELM327 bluetooth device that I already had, connected...
I fitted an alloy plate across the 2 inner handlebar securing screws. [IMG] The picture shows it fitted with a mount form an Akron waterproof...
Yes. I've had regulators fail and go short circuit internally.
I popped the cam covers off and I'm happy to report that the belts and guide pulleys are all on good health. :)
