Separate names with a comma.
That valve looks quite good. It's not going to need much of a grind. The keepers develop tiny ridges on them where they contact the groove in the...
White spirit will clean it off with no ill effects.
Oops! Red face time. :oops: You are absolutely correct; the openers will reduce and the closers increase. I must remember to engage my brain...
Yes, you will definitely need to re-check the clearances. Re-seating the valves will close the closer gaps slightly and increase the opening...
It's actually very easy. Remove the valve covers, which you've probably already done. Remove the spring clip at side of the opening rocker shaft....
A faulty wheel sensor will throw an ABS error. I had an intermittent connection in the loom wiring to the front sensor. The ABS light came on and...
Sounds like the horn is buggered. There is a small screw on the back of it that adjusts the internal contacts. A small turn either way might get...
Try this.. [MEDIA] I like the way he gets off. It's all about confidence :)
The new regulator is definitely faulty. It should be putting out between 13.6V and 14.6V.
It is a proper socket and works very well on both front and back wheels. It has the advantage that it is easily carried in the bike's tool tray...
Mine took about fortnight and I didn't have to pay duty on it :)
This is the best tool for both wheels http://www.motomfg.com/Steel_Ducati_1098_1198_SF_MTS1200_wheel_nut_socket_p/wh-4.htm
The powerlet sockets on the MTS are on the switched side of the ignition so you are powering up the dash by connecting there.
That's what I'll be doing if an element fails. I had these fitted to my ST4s with an old Oxford controller and they were great. The first heated...
It only takes a few minutes more with it!
I've always been lead to believe that about 15Vac / 1,000rpm is what to expect. So that would be around 75Vac at 5,000rpm
Sorry Fin, I know nothing at all about your "bloody a[prillia". Perhaps you could enlighten me? [IMG]
More power from higher octane is a myth. Higher compression engines require higher octane for prevent detonation and as we all know increasing the...
I'm sure that for the most part dash misting won't be a problem in Italy or Spain [IMG] But what I've come to realise is that you don't have to...
Long since out of warranty I'm afraid.
