Separate names with a comma.
IMO 22,000 is NOT a high mileage :rolleyes: Mine is just over 22,500 and has just had both heads replaced due to a porosity through to the exhaust...
Good you got your bike back, I hope all is well now. Interestingly, I had the same problem with the ABS/DTC on mine but it was the loom at the...
I don't think the 11ยบ engine will ever sound like a Ducati should. It's down to the cam timing with not enough overlap to get that deep boom and...
Yes. Mine were far too high when I got the bike. It was 2 1/2 years old and I suspect they had been like that from new.
Well that's probably right enough then.
I've always understood that a rule of thumb for the alternator AC output was approx 15V AC / 1000 rpm. So 15v at 1,000 rpm, 30V at 2,000 rpm, 60V...
Agreed, that happened on a Moto Guzzi V50 I once had. It seemed to be a common problem with them.
It happens on nearly all engines, bikes, cars, etc. You aren't aware of it on most of them because they haven't got a sight glass.
I've never heard of the Nikasil actually wearing out, usually the rings wear out long before the Nikasil does.
There's a guy from Glasgow who rides all year round and doesn't drive a car. He has several bikes including a Monster 1000S that has done well...
I found that carb cleaner worked remarkably well and then cleaning the contacts with a fine brass wire brush. If it's really bad some of the wires...
DCR8EIX
Yes, I'm very happy to see it is back again. :smile:
It is definitely voltage related. The revcounter is the first thing to stop working if the battery isn't charging. First make sure the regulator...
Thanks for the heads up on the difference between the 'R' and the 'RR'. Apart from Japan I think most of them went to the Aus and NZ markets. You...
My son's got hold of a GSXR 250 basket case. I have never seen not heard of a 4 cylinder 250 before. Has anyone else? It is claimed to put out 45...
Wrong way round Antonye. It will stay virgin as long as you only use the BLACK key. A new immobiliser (or clocks in this case) will stay virgin...
Yes it can. Here's a picture from the parts list of the rear subframe and it's attached components. [ATTACH] [ATTACH]
The rear subframe is held on by only 4 M8 hexhead screws, 2 at each side. They are loctited in and seem to be made of cheese :rolleyes: You will...
You are quite correct, so does mine. Yet it doesn't mention greasing it in the list of Torque settings, which is where I had looked.
