Separate names with a comma.
[ATTACH] My Multi [ATTACH] The Multi and 907ie [ATTACH] [ATTACH]
But my conversion only cost a tenner [IMG]
Yes, which concerns me a little. The bike had it's coolant recall just before I bought and my local dealer confirms it as having been done...
I sold my 2003 ST4s ABS just over a month ago with 48,420 miles on it. 47,420 done by me :smile:
A couple of weeks ago the ABS light didn't go out as it should on my MTS and the ABS disabled / DTC off warning came up on the dash. A couple of...
now sold.
Straight swap, no resistors needed. Interestingly, if there is no bulb fitted, either incandescent or LED, then the front ones flash at double...
I fitted a pair of these Cree LED bulbs. They fitted inside the standard indicators - just!
Sorry, I've no idea. It could be a bare wire causing a short, a faulty component or maybe the fuse just died of old age.
On the early single phase 748 and 916 there is the fuse you show. It goes to the regulator, it must provide an ignition reference voltage, but it...
It is identical to Fiat Steel Grey Metallic
An air bubble will just compress when you apply the brake giving you a soft feel at the lever but it is a hydraulic system and the pressure at...
I no longer have the ST4s but one of the first mods I did was to fit HID to the dip beam. The pattern was still rubbish but at least it was...
I have 2 other diagrams that may help. One is for a 239/250D where the Ducati self-generating ignition has been replaced with the Electrex set up....
Sorry, I misunderstood what you were looking for. There is a wiring diagram on Bevelheaven but it's not great and the legend is in French. I have...
If the electric handsfree lock was in use it would unlock when the dash switched on after entering the pin code, so no need to break the steering...
Elextrex do a complete 12V system for the wide case engines with stator, rotor and regulator. It might save you a lot of hassle. The also do...
Sports classic wheels can be fitted but you need to get a bit machined off the inside of the front calipers to clear the spokes.
