Separate names with a comma.
Indeed, like this; [img] Also, it's not important to connect the hoses, flow (M) & return (R) to the specified fitting as it is just a 'loop'...
Maybe worth dissecting the oil filter? When the gearbox bearing failed on mine (as per above picture), there was also plenty of debris that...
Pump is running but is it pumping? Is there a split hose inside the tank meaning the fuel just circulates internally? If all that appears good,...
Rocker flakes are chrome so not magnetic.
Had similar with my Monster (twice!). This; [IMG] Turned out to be a knackered bearing on the gearbox shaft; [IMG] Obviously engine needs to...
When you try to shift, does the pedal return back to it's position positively?
You're just compressing or extending one fork leg independently, the spindle/wheel centre will stay as it is.
The Ohlins bottom yoke on mine has a hole, the OEM versions don't but no reason you can't drill one If you don't want to do that, you should be...
This happened on one side of my Monster front wheel, it was a new wheel never been fitted before but I did have it powder coated so maybe it got...
I think the difference is that P4 are machined from billet whereas M4 are cast? So the P4 cost more to make and therefore were only fitted to...
They look like those used on the 999/749R to me, albeit Ducati fitted the silver coloured model other manufacturers fitted gold or grey. These...
Are they Monoblock construction? i.e. a one-piece construction or a two-piece that split down the middle/bolted together? Because they don't look...
How much? :astonished:
New clutch fitted, basket, hub, plates and release bearing; [IMG] Should be good for a while now except, if I work on the 0.6mm wear limit...
Regarding clutch tools, I just bought a new basket & plates for the Monster after discovering how badly worn it was. The seller included an alloy...
If you're still looking, I have this in my collection. Too large to email but could upload it somewhere for you to download.
That's why I like black wheels...
Coincidence that this thread popped up again just as this arrived; [IMG] Proper old school 110 width rear tyre, been more than happy with the...
Not easily, you don't want it falling over so I'd recommend you find a safe place to leave it. You could get one of the fancy Abba? stands, might...
Paddock stands; [IMG] If the rear wheel is like that of a Monster/SS then make sure you refit the conical spacer on the sprocket side the right...
