Separate names with a comma.
Not sure how much interest but, I've often read posts where people are asking for brake caliper seal kits and that Brembo/Ducati don't offer them...
IIRC, the spec is 38.5mm but you'll be better off with a little less - no more than 38 otherwise you'll struggle to find neutral at standstill. I...
I lived there in the late '70s and, back then there were no licensing requirements, no compulsory insurance, no helmet law, only a 1,500 lire P.A....
Agreed and, IMHO the Pirelli Rosso are excellent. Plenty of grip and decent wear but I'd recommend fitting a 120/70 on the front.
Indeed, to add to the above: in Italy (and probably Spain) you can ride a 50cc bike at 14 yrs old with no/minimal licence/test requirements,...
Just measured the frame width on my 916 and Monster, the 916 frame is 2cm wider.
I ground a large, offset ring spanner specifically for the job but can fit a small (1/4") ratchet socket onto the nut so the frame must be further...
I suspect the frame is narrower, AFAIK the engines are the same.
I bought a Moto Guzzi in Florence and did consider riding it home (around 1,000 miles) but due to it being old and unused for some years plus the...
I have one of those cam locking tools but it doesn't fit because the cams have been degreed and so sit slightly off the standard position, as such...
Agreed, maybe not D8EA but I'm using NGK plugs in all my bikes and have had no problems. I used to replace them regularly as 'service items' but...
I would go for 38mm pack thickness at the most. You may need to switch some 2mm for 1.5mm plain plates to get there? Not sure if 1mm plates exist...
When I changed the engine in my Monster, they wanted proof of capacity/engine no. from the garage that fitted it. As I fitted it myself I didn't...
