Separate names with a comma.
You know it makes sense... ;)
If you mean the forks, 1098 and 1098SF may have the same forks? But the 1098 Ohlins are 54mm at the bottom yoke compared to 52mm for the Showa...
Sounds like voltage loss due to Ducati's marginal wiring. HID lights have a habit of cutting out/not lighting/staying lit etc. if the ballast is...
Don't think a TPS would do anything if you've got the standard ignition/igniters? I have an Ignitech ignition on mine and fitting a TPS to one...
My experience of buying a cheap frame and building it into a bike means an expensive bike. Unless you've really got most of the parts it'll almost...
I've never removed the swingarm from mine although I have removed the engine and the pivot/bolt pushed out really easily. But surely you could...
I've got a QB carbon hugger. Doesn't have the exhaust clearance 'dimple' and has never touched the exhaust, it does however tend to sag slightly...
K-tech; http://www.ktechsuspension.com/ based in the midlands, you'll not find better.
The one on my Monster is 12mm but it also has a 2.5mm 'hollowing' machined into it but it is not an original Ducati part so not sure if that...
I looked into this with the Guzzi and there were insurance complications, making it almost impossible. Not to mention that it was ultimately...
I imported a Motoguzzi from Italy 2 years ago, I went over to view/buy it paid cash and got all the documents (like you have) but in the name of...
Indeed, the red cord that is inside the belt rubber and often claimed to be kevlar is glassfibre (Kevlar is yellow BTW).
Get well soon. :)
M10 x 1.0mm, (same as brake banjo).
Looks well cared for, a bit too blinged up for my liking though.
I don't know for sure what it is from, it was advertised (ebay) as 1098RS but although a similar design/shape to 1098, it is much bigger and has...
I bought the hoses from a US ebay seller, they were said to be for 998RS? Whilst they had the right fittings they were too long as this, pre-cut...
My Monster; [IMG] Cooler is from a 1098RS and also uses the push-in fittings so needed special hoses. Other alternative is that some of the...
The Termis for 916 series bikes (and others, e.g. Monster etc.) have a rough finish carbon fibre rather than the smooth glossy finish that other...
Mange tout?
