Separate names with a comma.
I prefer the Marchesini (but I'm biased as I have them on my 916). It also seems to me that 10 spokes might be stronger than 5? although I don't...
I've seen a few of the cheapo tools and reckon most are fine with the riveting of the link, where they fall down (and apart) is breaking the old...
You could try altering the PC map (backup the original first), add a little fuel at low revs and see if it helps?
Or just check (once) what the difference is and fill to that level when on the stand...
Service schedule generally calls for two years or a mileage (probably 6k) but you could get away with more, however I would want to check the...
I check it on the paddock stand, can't be bothered doing any fancy balancing act (same with chain tension) the difference is minimal either way...
A blanking screw; As the crankcases are common to various models e.g. 900SS/Monster, the ignition pickup cable passes through a plastic gland...
Italian tuneup - Wikipedia, the free encyclopedia
This help? [MEDIA]
Updated pic after some winter fettling, including replacing bent exhaust valves & pistons; [IMG] Hopefully get some miles on it soon...
I went to Colditz in the '80s when it was the old East Germany, spent quite a bit of time in the area. Roads were a bit run down then but probably...
I had exactly the same thing happen on my 916 some years back. I'd had it repaired following a collision that broke the clutch so the bike had...
Can't imagine it would matter. I used copper when fitting mine, mainly because I'd got a load of brake line copper washers and they are the same...
My 916 throttle is very light, even with a fast-action throttle cam so there's something wrong with yours. To contrast my Guzzi has a really...
Later Monsters used a 25mm spindle whilst earlier models a 17mm but you can interchange the wheels/spindles by changing just the bearings and the...
I got a sheet of black alloy mesh and some finer stainless stuff off ebay to make oil cooler covers and other stuff, got it with larger holes than...
You may need to do some engineering work to fit a later pump? I used a DS1000 pump on my Monster as it has a greater flow and aside from the...
I needed 20mm on my Monster stand. I welded some 20mm plate to the end, shaped to match the existing stand. On my 916, I bought a longer stand...
I use an LED bulb because standard bulbs don't last long enough. The LED bulb I bought is a bit longer than the normal bulb and as such the bright...
I had an oil leak through the seal on the clutch pushrod on my 916. The oil would drip when on the sidestand onto the exhaust pipe and then smoke...
