Separate names with a comma.
Are you sure the pump is for the radiators? I ask because my heating system has a pump on the hot water circuit (as well as the radiators) to...
In this case it would be a poor show if not covered by warranty. :frown:
Get well soon Al.
Whilst a youngster in Italy, we used to hang out at a local bar after school, said bar was on a busy roundabout/junction near one of the city...
Probably the clutch...
Bloody good hearing if you can hear flaking rockers! If a valve clearance is out it may make a little more noise but it would need to be very bad...
1098 front mudguard will fit 748...
Mmm... [ATTACH]
If it was able to provide enough boost to make a difference where would the power to drive it come from?
It always seems odd to me the amount of checking involved with passport control for UK citizens returning to the UK. And yet, apparently we have...
For a Desmoquattro you'll want 'bent' ones - fold the end so that you have about 20mm sticking out at around 45 degrees to make it easier to get...
BMW had big problems with their 6 cyl 2.5L (and others) apparently the sulphur content in certain fuels was eroding the Nikasil? I had a 1996...
Here's a pic of a broken one - you can see how the screw tightens the mirror into the socket; [ATTACH]
Undo the retaining screw underneath (through the hole) a little to release the ball joint and it will pop out.
That's the solenoid.
Test that the starter switch circuit 'closes' (circuit makes between the 2 wires) but also check the small connector in the back of the solenoid...
There are more than 2 wires in there, in fact there are 4. They 'split' around the handlebar so 2 go to the starter and 2 to the kill switch, if...
5mm.
The one pictured is from a '97 ST2 and is the same as those on a '95 M900, don't know if the 600/750 use the same but I would think they do. The...
Thread is 8mm x 1.0mm (fine), length of threaded part is 18mm, although only 15mm is actually threaded. The shaft that the thread is on is 13mm...
