Separate names with a comma.
Old spec coil connection is directly to top of coil itself. The later type has the fly lead.
No.... I did to :p
Plenty of release agent in the hole, with the bike on the sidestand (to help it run into the thread) then heat the swingarm around the bolt area....
Have they sheared due to erosion of the heads over time? I've seen old clutches begin to polish/wear the screw faces. First plate in is a friction...
The power supply and earth for the diagnostic tool is taken from the diag connector. There's no separate PS. Trace the loom back in the subframe...
Never heard of them. Registered in UK but director is/appears to be Chinese?.... Prices are no better than Ducati but carriage seems expensive....
The power supply to the diag connector has failed. It’s on a short sub loom and connects to the main loom via a connector under the seat. Seen a...
V4 switch has no cabling. The bikes loom plugs into the switch. May be doable, but you’ll need a connector for the switch and loom to make a patch...
That's a first.... Only thing I can think of is that at each key on, the immo system generates a new code and that is transferred to the key....
Both those are burnt out. Agree with Steve about not soldering them... makes working on the bike (belt changes) a pita. Good connectors and...
Sounds like reg/rec. check charging voltage across battery when running. You’re looking for 13.5+ volts The issue with it not pulling, could be...
SDOC is pretty good. There's a range of cleaners under the banner of Pro-Green that are pretty good to. Ph neutral is the key. I hate Muc-Off....
Don’t know for sure. It’s listed as “bug fixes” on the update. Reading this thread, there appears to be many
There is a SW update for the Bluetooth system. Worth dropping in to your dealer and see if it's applicable. Done about 4 in the past 2 weeks.
The 12V is "flashed" by the BBS ecu over the CAN network. The cascade indicators will be getting a pulsed 12v supply hence they only work once. No...
Measure the spring length unloaded. It should be the 158mm. Threads showing will correlate with the 12mm preload, but you need to know the...
The preload is the spring compression from its free length, not the sag. Ie at 158mm fitted length, that would from a free length of 170mm.
Just fitted the K tech rear shock to my 899 to. Needs a tweak or two, but the back end feels soooo much better, more planted less skittish over...
I’ve seen on a several occasions is that the linkage can catch on the electrical connectors tied behind the frame rail, just above the battery....
There are now a few different spring lengths/weights and 2 or 3 different cap depths. Some suppliers have picked up on this, some are still...