Separate names with a comma.
Just reading the post thru again... you say you're waiting on a new left case? The cases are machined/supplied in matched pairs and shouldn't...
998 clocks use a mechanical speedo drive, 999 is electronic off the rear wheel, so you'll need to get the speedo drive off the front wheel. Signal...
The moisture evaporates thru the breather, but especially on the 749/999 the pipe to the airbox is quite long before it reaches the separator...
I've looked around in the past with little luck. Especially the mains... A local bearing supplier quoted double the Ducati price! The mains have a...
Just about finished mine off. A few hours on the dyno should see him fighting fit again :) [ATTACH]
genuine Ducati ones for the R ........ £16.91 a piece :)
Yeah, all the small axle wheels will fit.
The early ones like yours are a bit more difficult to land. The rear had 'Ducati Racing' cast around the axle. Iirc, they only went on early 916....
4% CO is about on the money
916R existed in '97 and '98 and was the customer spec race bike. Basically a race ready SPS without the lights etc. and race ready...
Defo sounds like DTC is cutting in. On level 8 it's second guessing that it's going to slip rather than spinning up. Try level 4 for starters
IMO it's more about the oil than how often it's changed. I use Motul and have customers doing 7500 on a sump full before it's changed. No issues....
Seen a couple of 848/1098 motors let go on the big end bolts but they were ex race/unknown history etc.... Seen mts1200 go on mains which I...
Yes Ben. Cornerspeed Ducati.
What Chris said. You only need pay for the lead.
I'm over in Sutton, just down the A38 from you. If you want it plugging in and giving a once over, I have the equipment to do that so at least...
Does sound like the battery. It may have 12v but not enough juice to fire the bike up. YT7 is correct. Li-on are coming on and price is getting...
There's a slim chance you can brick one of the ECU's
There's some free software about and along with a lead off eBay, you can do it yourself. Have a search around the forum for the details.
The black cover is held in on 2 rubber grommets and a small lip arrangement on the bottom. Gently pull the top edge out and it'll all become...
