Separate names with a comma.
Which screw are you backing out? The flat head screw of the 2.5mm grub screw?
They don't look much more than frame covers to dress the subframe....... Can't see how they will reduce the heat at all tbh. It's still going to...
They can flow quite a bit before they stop. Occasionally they do keep weeping though. If there's a lot of fuel in the tank, the pressure from the...
Pickups do fail. They are quite pricey from Ducati as they only come in pairs. Electrex sell them separately and the work just fine. Bit of...
Cable ties work just fine and are cheap, just don't tighten them too much. Yes, the rubber ties are available from ducati for that Oem look/finish
The stalling issues on the early 1098 was cured by cracking open the air bypass screws a little. Rear first by about half a turn. The full system...
I've run A2 in my brakes on several different bikes without any issues. Many a customer have to. Yes, technically they're not to spec of the...
It's possible the wheel doesn't need weight, but a lot of rears don't get balanced because the shop doesn't have the adaptor for the single sided...
There's no error display thru the analogue clocks. I'd guess there's a problem with the wiring.. The sweeping of the clocks could be picking up...
You can connect them any which way.
The 749s fuelling can be adjusted and setup with diagnostics and an exhaust analyser. I'd get that done first before you begin thinking about...
Best of luck with them. I have a feeling I may be in touch ;)
Haven't heard anything concrete yet. I understand that the Harley concern in the premises are having delays with their new place so haven't moved...
Only one side is connected to the cells. The terminal is formed back on itself and sits in a recess in the casing. They're pretty easy to...
It's difficult to call just from the photos but the T slots just don't look quite right to me. The horizontal looks a fraction out, but the rear,...
The Ti units are homoglated and still have a cat fitted. If you want noise, then the carbons are the "race" ones ;)
The belts covers off the early bikes will fit. However, the part number you've listed isn't the one in the picture. The number you have is for the...
That looks like it's had an alarm fitted at one point and since been cut out. The loom should be taped up. You could tidy things up, but there'll...
Looks like one of the screws off the throttle butterflies.... no idea how it'd get down into the sump though.
Glad it's sorted. The issue will be it hasn't been checked. They do come loose and the fact it has a safety clip there won't stop it, just that it...
