Separate names with a comma.
Yep, 300V is expensive. Take a look at Motul 7100 also. I use that as my regular service oil with no issues at all. Still top notch oil, but...
The coffin reservoirs on the older Brembo are integral to the master cylinder. If you want clear remote reservoirs, you'll need new master...
Motul 300V 15/50 :)
As above...the crankcases, and covers are sealed up with Threebond now. You'll need to adjust the shims on the crank, gearbox and lay shafts to...
Engine number is on the LHS stamped into a milled strip under the alternator cover.
Bendix MF pads work a treat and aren't silly money :)
I always build slippers up with 4-5mm of drum protruding past the last steel plate. 4.5mm is ideal ;) The problem with getting tied up with pack...
The swingarm looks stock but painted gold. The hub clamp bolts are usually in a different position to the road arms. The wheels are stock 5 spoke...
The shim/spacer is as you suspect the one that sits behind the flywheel. It is a larger diameter than the crank as it fits over a bushing that...
Pm me the vin and engine and I'll check it on ducati system if you like. Not aware of a black frame being produced. Probably a repaint? I see...
I've fitted a few sets to customer bikes and there's nothing wrong with them at all. Very nice kit, fit well and good value
It's a maintenance thing as Antony says. Give it a clean with some wire wool and refit with a smear of anti seize and all will be well. There's no...
In terms of charger, I used optimate/datatool for many years. I recently took a long look at what was about and chose to move to Ctek. The...
The service schedules changed quite drastically in 2007. The earlier bikes were quite comprehensive regardless of mileage. Tbh, a bit of common...
The separation is the main issue... My tester won't pass them. If there's a use and construction issue then I think you can get pulled for them as...
That quite often happens. There are a few scenarios.... Safety related ones are issued in conjunction with VOSA and a letter is sent out. Then...
The 1098 sprocket recall replaced the rear sprocket with a stronger unit. The cutouts around the mounting had fillets forged in to them. There's...
The recalls are VOSA generated and sent out every couple of years to originally effected bikes. The recall may have been done but the paperwork...
