Separate names with a comma.
Clutch more than likely needs bleeding, especially if you're running a small span on the clutch lever.
Still about same money. The belt situation looks to be more of a rationalisation with the later spec belts being the ones kept on board. There's...
Yep. The 900 belts are different....longer and with round teeth :)
The square tooth belts are only applicable to 600/750 and are still available.
M25 x 1.5
No sealant. Just make sure both surfaces are clean and dry.
Yep, a little bit out. The Desmo occurs at 15k on the 11 degree motors
I'd leave it in situ Jon. If you are going to remove it, I'd take the sub loom out completely and return wiring to stock
It's not a recall. It's a tech bulletin applied to bikes having or potentially having problems with indicator operation. Can't recall the extent...
Yep. It's part of a small sub loom that's plugged into the loom running down the inside of the fairing panel. The lh switchgear isn't the problem...
The cap MUST sit flush on the spring post. It's not mechanically secure or stable to rely on the screw to retain the spring assembly in place. The...
If fitting longer bolts moved the position of your spring caps, I'd check that the screws haven't bottomed out in the spring post rather than...
The 1098 springs are different to say the 996. They're not as heavy and a little longer. There are a few different stock spring specs in use now....
No EPROM is plug n play tbh. Best to get it set up properly to get the best out of it. On the non start, did the new EPROM go in the right way?...
The service schedules call for the bike to be serviced every 12 months. This is the annual or oil service. There are then "Desmo" services carried...
you stock gearing is 15/36... the 748 ran 14/38 with the same chain without any problems. Same wheels, swingarm etc... You can run that gearing...
Tommy, if you want to see how/learn how the belts are done, you're more than welcome to bring the bike over to my place and I'll show you. Have...
Don't sound too far off the mark tbh.
The update is to a limited number of bikes and involves fitting a small plug in loom to the existing wiring. It's to address a possible issue with...
Bump..... Still have these after a couple of failed sales. They don't include silencers though and only Termi will fit. £1000 buys them and I'll...
