Separate names with a comma.
What you've replaced are the reed valve and housings of the fresh air injection. This is in place to clean up the exhaust gases after combustion....
That'd do it.....£140 before you charge oil and filter out.........The north ain't all bad :upyeah:
Not unusual tbh. It's the drum settling back down against the drive faces on the back plate. Could be a weak or broken spider spring, could be due...
The 1.4 hours mentioned, is the standard time for the first service indicated by Ducati. I think that these are going to be published by Ducati...
It's also missing the screen and mirrors. If its imported, it won't show up on UK insurance. You can see the lock stop in one of the pictures and...
I'd walk away.....that's had a good thump from the fork leg or lower yoke. That would probably be enough to write the bike off if inspected for...
If you're sticking with the stock screws, the wellnuts are about 60p each from probolt
I've lost all the thread icons to. Neither Windows 7 or IOS6 show them...
Andy, that socket will work fine and is all you need to get the rear wheel off. The 41mm socket is for the sprocket carrier and you don't need to...
The stock fasteners are the fine pitch. You can get spares from your dealer or pro bolt do them.
230Nm is defo too much on the 46mm nut. That's for the 55mm nut on 1098, MYS1200, Diavel etc. 848, 748, 996 etc. are 176Nm wheel side and 141Nm...
That is simply stunning. Perfect balance and blend of tradition with modern tech. Beautiful :)
Always....even if only whilst I put me lid and gloves on. There's some truth to the oil feed question on the desmoquattro heads. It's not the pump...
Happy to help with the parts if you let me know what you want. The paint code......I had a lot of hassle, or my painter did matching it up. I...
Super mono :)
No problem. so long as the suspension is loaded, then you'll get it right.
It's usually clutch drag causing it. Either there's air in the clutch system or the slave is leaking. Bleed the system and /or check for fluid...
B&C do some decent tools. "sensible" is a big word...... a cheap one will destroy itself after a few uses. My kit was about 300 quid and has been...
The gold finish on the Tsubaki is pretty poor tbh. More a paint..... The R4 SRS is a good chain and the gold finish much more durable.
you won't have a problem with either choice. It comes down to colour really....the Renthal is a better quality gold finish than Tsubaki. If you...
