Separate names with a comma.
Has the clutch system been bled at the master cylinder as well as at the slave? The banging is usually caused by clutch drag....
Bendix MF work very well all round and for the money take some beating. Had no bad feedback in 7 or 8 years now.....
Ah, thought you was on fuel injection.... 4% is still usually a good aim for idle on carbs, but you won't get an meaningful readings just holding...
Around 4% at idle usually works well.
Nice one. That looks pretty damn good. Really sits well with the bike.
I have the following Ducati Performance parts all with 10% off list and either free fitting or free postage to Ducati Forum members..... DP...
That's all i do with mine Maccaa. Give the forks a good bounce or to at the same time to stop the seals drying up and get another beer :)
Brand new Ducati performance header kit for 848 EVO incl. ECU and air filter. No silencers, just the headers to fit Termi end cans only. RRP...
Looks like the pivot bolt has been cut short. There should be a locknut on the back of the stand either way. If you want to go back to flip up,...
More often than not, if you get a grip on the spring cap and turn that anti clockwise, that will undo the screw as well.
That's a spring cap.....
The newer bikes are running thicker belts, around bigger pulleys to give them an easier time. The 5 year change relates on to the 11 degree timed...
MTS and Diavel are 5 years on the belts Stu, or the 15k, whichever comes up first.:upyeah: The new schedules have caused some confusion but that...
Bridestone BT016 or the new Pro's. Wear is very good and the edge grip is epic.
The lever is causing the system to 'pump up' by not allowing the system to de pressurize when the lever is released and is causing the brakes to...
Shouldn't be any dents in either the upper or lower frames tubes on either side. Looks like it's had a knock. That'd be one helluva a tank slapper...
To be honest, i've seen nothing but hassle with pattern levers. I know of two that have resulted in accidents. I won't fit them let alone supply...
Only the tool pack is listed and there's no breakdown, so that would indicate the gauge isn't available on it's own. If you really wanted a gauge,...
The shock bolt on the swing arm can waist.....frame mount tends to hold true
Check the engine mounts. The rear especially can loosen off. Had bikes failed MOT for suspension wear when it's been the rear mount......
