Separate names with a comma.
You can get all the parts you need from a Brembo dealer. JHP or Bike Torque Racing. Done quite a few for customers converting 749/999 to 748/996...
If the first plate wasn't sitting in the basket correctly, i'd guess the clutch pack needs adjusting. I fitted a brand new clutch last week and...
Is it just a reset that needs doing or has the TPS gone faulty? If it's just a reset, then the info above is spot on. Either a dealer reset or use...
7.5W is correct weight
The battery is a Gel type. YB12B-BS is the OE but you may see YB replaced with YT, or CB for instance....depends on manufacturer. Any decent brand...
The important thing to remember whenever tesioning belts, or checking them is that the relevant cylinder is at TDC and the valves closed. If not,...
In the workshop manual under "frame". If the manual you have was a download of the 'net, it's probably the draft copy that got leaked. It's got a...
Nearly....M10 x 1.25 x 60mm
25Nm +/- 10%
Use a tubular drift that rests on the outer steel casing. Something like a 1/4" 12mm socket or such like. Make sure they're lined up and then a...
Axle is the same as all 749, 999, HYM796/1100, M796, MTS1100/1000, M1100, M4RS, GT1000 and Desmoseidici........few to go at Jerry :wink:
The setting dimension is from the top edge of the lower yoke, where the fork is clamped, to the top of the fork cap. It's 244 mm
Just took a look thru the main manufacturers web sites on tyre choices. Bridgestone list a couple of tyre choices (S20 and 003) for the 1199 and...
Possibly. Depends how bad it actually is though. Ridges, although small, appear after a short while in use, it's a function of their operation and...
£203 each. The "ridging" doesn't necessarily mean that they need changing. By their design, friction occurs and whenever it does, wear takes...
They are wear and tear items unfortunately. The important thing to check is the thickness. There's a wear limit on them and that's a much more...
It's not a great deal more difficult. The Termi kit comes with all that's needed. Cans, air filter and a new "race" ECU to suit the new set up....
Sorry, by reconfigure, all i meant was he's notched it down a level on the dash. Say from 4 to 3. No techy wizardry :wink: Douglas wanted better...
Douglas is indeed running a 190. He's made a slight adjustment to the DTC settings but all seems well.
I stocked and used Bendix for several years now with no problems. Cheaper than 36 quid a caliper to. The MF compound will cover pretty much all...
