Separate names with a comma.
The synchronisation to the higher of the 2 recorded mileages is probably more to do with a means to avoid ‘clocking’ the bike rather than a means...
The mileage in the BBS will be updated to 24,000 too if you go through the procedure. You may be better off leaving the BBS as a reflection of the...
There’s a lot of very helpful stuff from people who really know their onions in his Discord channel too.
When you say the mileage is way out is it higher or lower than that which is actually incurred ? Just be aware that when the mileage count is...
I don’t believe it will play Spotify at all. I believe you can only play music that’s actually stored on your phone. Press and hold for 3 secs...
What Treadlightly says. AFAIK the wheels are supplied to the factory complete with bearings (and tyres) and the axles are fitted dry. Both my...
It all depends how handy you are yourself. It will need all fluids changing and new belts fitting, all of which can be done yourself if you’re...
If you use a long reach hex you’ll not need to undo the top caliper retaining bolt. These things (if you don’t already have them).They’re only...
Just to make sure we’re talking about the same thing, by the pinch bolts you mean the 4 bolts which hold the two halves of the caliper together,...
Looks like it’s moved now :upyeah:
@Ducbird @eltoro post needs moving to the correct thread.
But if the original map, which was off-loaded and replaced with the BHP map, is now not compatible with your ECU that implies your ECU has...
I don’t disagree at all, but it will be even better value for money in a couple of months time when dealers start to heavily discount bikes like...
When the system was sold it should have been allocated to a VIN for the official sales price includes the new maps. Ask the seller where he/she...
No timing marks as such plus ideally you need a diagnostic tool to verify the phase variator positions are where they should be before and after...
Brembo 07BB37LA for the Rally. It’s Brembo’s aftermarket pads and it’s a better pad material than the cheaper versions supplied as OEM. Im sure...
I’ve used 3M carbon fibre wrap a few times, it’s pretty close to the Ducati stuff but you’ll always tell it’s a wrap not the real deal. Also don’t...
The bleed nipple is tight though isn’t it? It’s not loosened off whilst the lever is cable tied to the bar is it? Otherwise as soon as you release...
Just cable tie the lever back to the bar and leave it overnight then bleed at the m/c. Any air will rise to the top overnight and into the m/c as...
Frim your description it sounds like you have air in the master cylinder, bleed it at the master cylinder and see what, if any difference, that makes.
