Separate names with a comma.
[ATTACH] Next steps ? Run a jump wire from relay pin 87 directly to bulb connector positive pin — bypasses switch and all wiring between relay...
Thanks Let me work back through the feed , from the switch to fuse holder and see if I can find the point the voltage is dropping off , there s...
Yes, 12.15v Main beam ve+ battery ve- Across the battery was the 13.48v under the same conditions, main beam on earthed to battery -ve
13.48v
That was done Main beam on , new cable for earth 12.5v
?? I dont comprehend your reply, alternator and rectifier was tested as per workshop manual , everything passed ,It's in the first post i am...
Thanks for the replies , I have her a few years , I rarely drive in the dark but I have ran the main beam at times , what struck me this time was...
Will do I also have the exact start upgraded battery cables fitted a few years The bike, runs fantastic until I turn on the main beam
Thanks Paul Full disclosure , I am not an expert with the multimeter, please excuse any errors, Hayes manual and YouTube are my guides, if...
All headlights on, full beam , drops to 11.2v
Any advice, thinking of running a new earth to test if it is earth from headlight , all wires look fine , no corrosion [ATTACH] [ATTACH]...
Found Craig and Luke fantastic to deal with and always had a bit of banter Unfortunately Brexit put that to an end , still at a loss getting...
I assume this is a transponder , datatag ? [ATTACH] [ATTACH]
Thanks
Hi Tamburini Model I got the bike painted , I need to adhere the mesh to the seat and nose cone Any recommendations, what is used , especially...
Does anyone know the thread pitch of the crush drives available now, Ducati changed from 1.5 to 1.25 or vice versa
Great , thanks Paul
I bought some new oe grips , the throttle comes with the throttle tube , cannot find anything in the Haynes manual or online but any tips on how...
All ph neutral shampoo, foam, won't strip your wax If your bike is full of tar, road salt...vasco prewash is a good product Iron X on brakes and...
Should all the hoses, holes with the exception of the threaded holes for the fuel cap , allow air to pass through, vented to air? [ATTACH] [ATTACH]
