Separate names with a comma.
I see a Service Reset on my IAWDiad but it doesn't seem to work ??
I have found the "Service Reset" on IDiag, but it does'nt seem to have any effect ?
In the end I ordered a stator from Moto Electrical, as Rex Speed dont have one in stock. The RM Stator job looks to be a better quality item than...
Just found, at Wemoto, an Electrex stator for £90 - sounds good. Electrex are a good make I believe ?
Of course !! But I get infinity, with engine not running, between yellow and ground so it means that - um ?? Anyway, I will take the cover off...
I just managed to get a reading from the alt, around 15v AC on each of the yellow wires to earth, didnt get chance to measure across two yellows...
Cheers Derek, all infinite and I'll check output when I can get the beggar to start. Battery voltage 13.v with ignition off, drops to a smidge...
She has a new regulator and battery. I checked the diodes on the old reg and they were all good. I have run a separate earth to the reg/rec but...
Wow - many thanks for your help guys - much appreciated !!
Cheers funkatronic but I am about at my limit with IT stuff, but I might buy this of ebay :- Oxygen lambda o2 sensor eliminator kit Ducati...
Stator windings good hot or cold ( 0.8 ish ohms), and infinite resistance to earth. Had another run in the garage, and at around 50 degC the...
Relays and fuses replaced. We've just had a run and she stalled at 65 degC with the lambda volts falling from 950 mV to 25 mV. The battery is only...
Sorry finm, which bit are you agreeing with ? ( yip it does?)
Many thanks guys for your help - much appreciated !! Relays on order, new fuses tomorrow. Fired her up today with voltages and ignition advance...
Many thanks guys ! The Yuasa battery and reg/rec are both a month old - not that that is any guarantee !! Battery now on charge, do you not like...
The engine is now "not catching" again and I have error codes PO 351 and 352, Ignition Coil A & B Primary/Secondary Circuits "too low"
Well, that was interesting! Plugged everything in, bike started fine. Looked at the measurements on IDaig. On lambda 1 the mV started at around...
Chrisw - you are a star !! I changed IAW P7 PF09 to IAW 59M PF09 and we are in !! I have some fault codes, one or more of which is probably the...
Cheers Turbogeek, I've got Com 3 on my device manager for the lead and on the IAW Diag Is IAW P7 PF09 correct for a S2R, there are no other...
I've got a smart phone, might try that ?? ( but it has'nt got a USB Port !) I'll try and get the old laptop working too
