Separate names with a comma.
Standard exhausts; [IMG] Termi exhausts, you can see the 2 mounting brackets for the heatshield; [IMG] Carbon shield fitted; [IMG] Whereas on...
The heatshield on the 50mm Termis fastens to the side of the RH pipe rather than to the mid section and so is curved but there are variations on...
I've located my old hub which is in the Ducati box the new one came in. Edited to add, I removed an old label from the box and there is a part...
Oops my mistake, I mis-read it as the cush drive numbers. :blush: I fitted a new hub to mine but I don't know the part number, unless it's...
When one of mine failed and 'machined' the adjuster, I replaced them all but kept the old 'good' ones in case of emergency, as such I've still got...
As an aside, what is the service life of the pink OAT stuff? I swapped mine from the blue stuff many years ago but, I've never changed it....
Earlier ones are smaller, so louder - don't know if they make any difference to power but, if so I wouldn't think it would be noticeable. IIRC...
I'm not sure how the pump plate is made on the 748E but, I would think the easiest way is to fit a plate from a 916/748/996/998 if you want to use...
Is that all it costs in the IOM? £121 here :astonished: though I suppose they haven't got many roads to pay for plus, a bike of that age would be...
I see it's marked it's territory in true brit-bike style... :upyeah:
I have a 15/39 on the 916 which I think is ideal though 748 has different primary gearing and is more revvy so will likely want want something...
Any particular reason you want steel? If for strength, have you looked at Supersprox? - aluminium centre with steel tooth ring so strong like...
Sometimes they charge extra others not, I recently ordered a radiator for my Land Rover from a company in the Czech republic. Cost just under...
If there was no 'O' ring and it wasn't leaking then maybe later engines have this sealed internally? However I'd want to be double sure that it...
My ('98) 916 originally had the thicker (paper?) head gasket with the thin base gasket. The rear cylinder head gasket failed and was leaking...
The fuse on mine melted, it and the fuse holder basically melded into a big lump of plastic snot. Actually it was still working as the circuit...
I've driven by car to Cervinia many times and skied over to Zermatt several times. Not for a few years mind but I wouldn't say it's a particularly...
Probably not the answer the OP's looking for but I have a Brembo radial M/C on mine which fits fine but, I also have (Cyclecat) adjustable bars...
My '98 916 doesn't have a switch and it has the 'suicide' stand that pops up by itself as would have had yours. I'm happy with that setup but...
Not sure what that is but I hope you enjoyed it and if not, I wish you a speedy recovery... :laughing:
