Separate names with a comma.
I assume that you ride with ear plugs. My 916 with same pipes is not deafening but just right. I don't keep my bike inside the house. You may be...
I have the same problem. I have an RCS 19 Brembo MC. No matter what angle I set it at or how far down the bar I go, it syill hits the tacho. I...
Personal opinion: When you paint it get genuine or repro decals for the year and get rid of what you have on there. None of that, except maybe the...
I don't think they make them in plastic anymore. I bought a new sender and the nut was aluminium. I have a spare but I'm in Aust.
On this engine - only around 4,000 km but about 3 years since previous belt change. The bike had done about 85,000 km at this stage. It's up to...
I've snapped a Gates belt at 11,000 rpm. Nasty![ATTACH]
Probably early head but would need to see side view to be sure
Make sure you get the correct belts for your engine. Late 748 engines use the same head as the Monster S4 and ST4 with a lower exhaust valve. The...
You can never have too many apparently. My 1098 has one off battery to engine case and another closer to the starter and 3 off engine case to...
Any more than 4 rings showing and the front tyre can rub on the oil cooler panel under heavy braking. From experience. Also, you must be...
Not sure about your fueling changes but the rest seems OK. If you're running Brad's cam timing you won't need, or get an advantage out of running...
Don't touch it. Just ride the bike and problem solved. It will only take a 1000km or thereabouts
I repainted mine original blue metallic. Decals are available from several sources and I used 2K clear over the decals [ATTACH]
BMW GSS rims are the same. Built so you can change a spoke without pulling off the tyre. Wheel changes similar to cast wheels. If you use a...
I also used longer screws for the brake discs as mentioned above. Cap heads on the RHS button heads on the left. I agree 15mm offset discs would...
I just completed this myself. I used: 1098 lower triple and stem. The original RHS spacer. Speedo drive is the LHS spacer Original 996/998 5...
You definitely need etch primer unless it is self priming engine paint which should be heat tolerant
It will be the little white connector in the back of the solenoid has popped out
Because I am a detail oriented person : the 748 had 4 different styles of graphics over the years. 1995 - 1997: The first was the big slanted...
Because they're only a single cylinder you shouldn't have to remove much material, just clean them up. You can't really remove too much off the...
