Separate names with a comma.
1000ds... dry clutch
will LIQUI MOLY LM 48 do for packing the bearing? it's equivalent to Ducati assembly paste? what do mechanics normally used for this bearing?...
Yes but it won't find in my slave cylinder.... There is no notch, neither is there on after market versions... Do you have a picture by chance?
[ATTACH] my pushrod also doesn't have this pin, i ordered a OEM pushrod from ducati for my 2003 year. but this one is different, likely for newer...
Issue is, when i removed it, it was like 1mm away from the shoulder. I dont know if it moved when it broke, or if it's meant to be this way, also...
What do you mean by official works job description? Is this something that i can find in the workshop manual? I can't seem to find it there.
i was thinking about pulling the bearing in with a long threaded rod a coupl of washers, nuts, and a socket... only issue is, how deep should the...
the rod is toast.... i did get all the needles out. The housing looks fine, considering it took me 2 hours to get that stupid broken bearing out,...
[ATTACH] part 29, i've ordered a replacement, thinking about sticking a m6 rod alll the way through and pull the bearing in with a socket on the rod
.....
how do i press it back in?
needle bearing fell apart :(... what else should i replace while i'm at it? orings?
“2003 1000DS, the clutch suddenly became stiff and feels like it’s binding. I noticed that in neutral, when I pull the lever, the pressure plate...
i have 2 questions about my 1000ds 2003. , where are the points where I can attach a cable that only receives power when the key is turned? I'm...
i see, i thought there is something wrong with the design because on the right side, there is a washer and it's tightly held in place, where as...
this pic clears things up, thank you! didn't realize there was a picture in the manual... as one user told me: The screw doesn't actually attach...
"When I bought the bike, the screw was broken off inside and the rubber grommet was snapped. I ordered the new screw and grommet, but they don't...
i have to very much disagree with you. DID Z ring gold chains are about as good as it gets, every DID chain i owned has a tight spot and a loose...
i guess then i'll ask a question people might not be afraid to answer, so we are taught mostly that loose is better than tight. can too loose...
forgot to say - 1000ds 2003
