Separate names with a comma.
What you have looks pretty much stock. Three rings against the slot in the top yoke. As mentioned, the exact distance is measured from top of the...
Was the battery good enough to start the bike? 12.4v isn’t the end of the world…. I’d get it scanned out before forking out on a battery.
I’m guessing this is the T800 upmap? Sounds like the flash or the checksum process failed and has locked the ECU. You could try disconnecting the...
2023 Monster 937 in Aviator Grey with Red wheels. 4618 miles Has all the electronic toys, ABS, DTC, quick shifter up/down, DWC etc. Full service...
Worth checking the head cover seals before you go replacing stem seals. Any oil past them will get burnt. The oil on the threads has most likely...
Is the oil on the tip or around the hex drive/porcelain? The black could be a rich mixture, if the oil is "outside" of the combustion chamber,...
Thank you both
Nice find Chris. Do you know of a decent source for Panigale 899/959/1199/1299?
Go to Hyside, or your local dealer direct and cut out the middle man. Bike parts simply forward the orders on to partner dealers and most likely...
The S gets the lighter forged wheels. Probably a bigger plus than the Ohlins to be fair.
Doesn’t sound like it’s being starved if it’s revving ok. Have you tried riding it so you put the fuel system under load? That will confirm any...
When you key on, is the neutral light on? Sounds like a side stand lock out issue?
It's quite normal to get oil mist and pressure from the filler plug if you remove with the engine running. You've got crankcase pressure from the...
Yes, but even so, most kits go T6 then T8. The 7 is an electronics size. Most of the screen screws I see have been rounded out with either an...
They were T7 torx drive. It’s not a common size that appears in most tool kits. You may find that over the years, an Allen key or regular torx bit...
899 runs the later type reg/rec, which is mosfet as are most of the bikes now. No issues with lead acid batteries
Honestly, I don't know of any as I've no need for one, so haven't gone looking. All my resources are factory supplied and in digital form now.
Where did you source your manual? Not all are created equal. There are a lot on the 'net that are littered with errors. The couple I have looked...
As I understand it, the issue was micro fracturing around the radii behind the disc flange as it leads into the bearing. The axles are unique to...
Was my initial thought to, but no. It’s further in board of the axle unit.
