Separate names with a comma.
bin it :)
The white connector plugs into the back of the starter solenoid. The black fuse holder slides onto its mounting on the bracket that the solenoid...
First thing I’d start with is a new ignition relay. That’ll make sure the pump, coils and injectors have a good supply. Check also to earth lead...
The handbook will tell you that you can connect under the seat……. Don’t always believe everything you read though ;) Go for a direct connection to...
I’d go straight to the battery. That socket is the diagnostic socket. It can be used, and you get an adapter to do so, but the circuit isn’t fused...
2 of the wires are redundant. One of the connectors, either the male or female may just have 6 wires? Heated grips run off a separate connector.
Yes Chris. They are RBW. Each throttle body runs independently with the TPS info being returned by the actuator unit.
There are 2 APS voltage readings, as Paul mentions. One will be either half the voltage of the other, or they will read inversely as you open the...
Have you read for any errors or seen any warnings on the dash? The 821 and 1200 can go into limp status if there’s a problem with the APS, the...
You'll pay import duty and VAT @ 20%, plus a handling fee. Make sure you're not charged the Italian VAT though. Some are still "trying it on" with...
Usually, if the indication begins to drift again after a reset, it’s a sign the sensor is on its way out. Again, sometimes the calibration...
230nm is for the single sided wheels. Yours is 180nm
Rich is a good guy. He’ll be able to help. Tbh, for what they fetch secondhand, youd probably be better getting another one and build your parts...
I can’t remember for sure, but I think it was an age/year thing. Possibly when the size of the exhaust valve cover changed? I’ve got a 996 head...
Not off hand, but most fasteners tend to follow DIN or BS standards. A low profile cap head, will be the same. I don’t think the ones Brembo used...
Have a look on the Accu fasteners site. Top quality, certification on some fasteners etc. A proper engineering supplies business. They’re one of...
From your description, it sounds like it’s not stood well. Perished rubber, corroded fittings etc. usually points to damp.. From experience, even...
The V4 motors run the pins at 90 degrees iirc. As northern monkey says, it’s about power delivery and allowing tyre grip to recover. I can’t...
It’s for routing the brake line and sensor cables. Keeps them in place once secured
Yes, you need to remove them. Airbox and throttles come out as one piece. Disconnect cables at throttle, jubilee clips on each inlet rubber and a...
