Separate names with a comma.
You're going to have to strip the plates out to make sure everything is seated correctly before you tighten the nut back up. Have you got a proper...
I used some strap loops through the top yoke and then loop through themselves. The hook of the ratchet strap then goes through this loop at the...
Never had any electronic aids so can't comment on it really, all I know is the 'grin factor' my old school 999 (1038 actually) gives me means I...
Hope you get your order sorted soon Keith
Yeah I must admit it was Ducati Croydon when I used it last and was spot on. I haven't tried the new guys yet, maybe I should and see how they...
I have always used bike-parts-ducati.com for all my genuine parts and never had a problem with the ordering process or delivery. Spot on in my...
No problem, happy to help, good luck and hope it's an easy fix.
Just a note on the radiator, only one fixing at the top is a bolt, the other side is just a pin that the radiator grommet slides on and off. Hope...
Make sure you use sealer on both sides of the rubber cam cover gasket and if it's misshaped in the packaging, sit it next to a fan heater to warm...
Hi, no wasn't me. Took bike off the road for winter maintenance at the start of October, back out in the spring
Welcome!! Dare say we'll bump into each other at Helmsley at least
Not really, he wasn't killed so no party!!
If I wanted to buy a bike I would do anything to secure the sale. I wouldn't expect you, as a private seller, to jump through hoops to sell it to...
Hi Phil, I got some aluminium plate and made my own. I knew that the timing was spot on so made a pair of tools to hold the cams before I started...
Welcome aboard! There's an answer to everything on here so you'll never be stuck
Good luck, hopefully they'll sort it for you
Hi, did you get to the bottom of your oil leak? Craig.
Hi, I'd recommend Damien at Daytuner Performance near Harrogate. He did the ECU mapping on my 2006 999 which I converted to 1038 with a kamna kit....
Hi all, I did some in-frame engine work on my 999 and swung the battery box out of the way. This put a little pressure on the alternator wiring...
If you pull the clutch lever in and can spin the pressure plate by hand then that's disengaging and if there's no slip when driving then that...
