Separate names with a comma.
No one can tell you how to start a bike as its will vary from bike to bike. Some might need a couple of squirts from an accelerator pump, other...
Ideally you need to be religious as prayers help......at least they did on my BSA. :-)
One other point with PHF carbs. make sure you have slack in the choke cables so you are 100% sure the chokes are shutting fully. Also check the...
OK thats fine. People do away with splitter and mount it on the caliper or master cylinder usually as its easier to bleed. the splitters are M10...
If you buy new go for a VW polo type switch/intermotor, it will be half the price or less than ducati...
You wouldn't normally be able to swap them over as they would not be the same , the rear having a banjo fitting
Please see attached Please note the needle is a K4 with the clip on the 2nd notch ( not a K42) [ATTACH]
Std setting assumes you are running 4 star leaded so not much use. On these PHF 36 the screws are mixture screws, on VHB for example they are air...
I agree Jon but we are talking cost and value here and i am just giving my opinion as to why an SP5 couldn't even reach reserve now. I spent many...
Back in the day a good friend had one of these. on one ride we swapped bikes and he took my EXUP . After a bout 10 miles i had chronic wrist...
He says its the Bevel Ducati never built ? but is a 750SS with the "wrong" frame :-)
Ducati owners club would be the obvious choice but values are so down now if you have an old valuation stick with it as its sure to be more than...
but does the front have Chinese brembo parts ?
In that case the seal on the piston has reacted with the brake fluid and swelled causing the piston the seize. I have seen this before.
5.1 is hygroscopic which means it takes on water from the atmosphere, this rusts the master cylinder piston which then seizes in the piston bore....
The ones from stein are PS15 castings but bored PS12 so the "nose" of the casting is a little longer than the original PS12. I have sold dozens of...
:-) ha ha
Small hoover belts are popular ...
I used to keep all the Ariete stuff but so much of it used to get returned because it snapped after a short while i gave up . People were getting...
Sorry . i get what you are trying to do but your method doesnt really show anything. If the frame was put in a jig no way would they be measuring...
