Separate names with a comma.
I think, if you look into it, Ducati specifically recommend not to use a Lithium battery on the MultiStrada V4 range due to the battery’s...
You’ll be surprised how long it will last before the 0.5mm gap starts to get larger. If the gap is small the tang on the friction plate can’t...
Those voltages aren’t too bad and I wouldn’t expect that to be the cause of the EML. If it had dropped to <9v when cranking that would be a...
Im fairly sure they’re an optional extra; the box may not have been ticked when the bike was first specc’d.
Thank you, I’m busy Googling now.
Yep, bleeding them or rather flushing new fluid through top to bottom was not an issue. The issue is there’s a small leak on the rear circuit so...
And don’t forget to remove the wheel spacers from the wheels before you take them to the tyre fitters. Sometimes the spacers remain held in by...
A friend bought me his wife’s Fiido City II e-bike to fix. “Can you fix the brakes on this please?” Sure enough they were spongy and useless as...
Skin of the teeth stuff though and edge of the sofa watching. France probably deserved to win the Chsmpionship more than Ireland but Ireland...
Believe it or not the recommended clearance is 0.6mm. Yes, 6/10ths of a mm, not 6mm. Your clutch drum looks worse for wear too. You may have to...
Enviro clutter. However, many (mostly Americans) seem to have problems with the evap canister because they fill their tanks to the brim so it’s...
M5 but they come in different sizes ie M4, M6 etc but most on the bike are M5. Pack of 10 x m5 Threaded Spire......
Where bolts are on the way out ie about to round off (or worse, have already :confused:), I simply replace them with s/steel cap head bolts of the...
:joy::joy::joy: You’re having a laugh
Sadly it was on my old laptop which after 12 years decided it wasn’t going to turn on anymore :(. Whilst most stuff was in the cloud this had to...
Sorry about that, just following the Brembo parts catalogue. Did SP Engineering take back the 4 bolt one? If not, as I feel somewhat responsible...
Any particular one :joy:
According to the Brembo parts site it’s the 68B407H2 rotor that’s required....
If the fuel spigot is anything like the one from which you’ve removed the fuel pipe it’s probably just crud from the rear wheel seizing it in...
It would appear not, no. Mind you, I did invert the wheel nut and hit that so I didn’t flare the axle end by hitting the axle end. I did hit the...
