Separate names with a comma.
both fuel breathers were blocked solid and the rubber breather nozzle is missing as well . i drained the fuel tank and disconnected the fuel pump...
most soft fronts are 32 but that is low for the rear 31
HI,can you recommend pressure,s in PSI for rosso III on a panigale 1299 for road use. thanks
i have been told more than once from the guy that used to dyno my bikes not to alter the TPS or it will interfere with the set-up on the...
both batteries are in good condition but when its cranking they are reading just about 10v. the bike for 11 years has always been a poor starter,...
its stickers/decals. inverness to yorkshire !
thanks, but its a 1299s i want
thats why i am asking
hi, can someone tell me if this 1299 2017 is a one off or did they come like this in that year.[ATTACH]
i will check both batteries again
the battery from my multi 1260 while the bike is running is reading 13.65 to 13.72 , so both batteries seem to be in good condition. double...
i checked the battery when the bike was running and it was a varying from 13.79 to 13.84. today i soldered the 3 wires between the reg/rec and the...
yes and one of the relays . i tried that with the fuel tank disconnected and could here something else as well. obviously i can hear the fuel pump...
ok, i will try that after another 20 mile thrash. side panel off rapid and attach jump lead to engine casing.
thats why i moved the reg/rec away from the 70mm race exhaust
i will check that, but again i think my issue might be electrical. why would a bad earth only kick in when the bike is hot at 70 on the dash.
[ATTACH] [ATTACH] just removed the cover plate and checked the gaps on the rear cylinderhead. first time i have done this but i am pretty sure...
i did that using exact start cables, pigging backing the original cables. it helped a little.
i posted in january about the rear cylinderhead being covered in black soot inside, whilst the front cylinderhead was clean inside. a motorcycle...
why would heat affect it. i though it would be an electrical issue
