Separate names with a comma.
Its worth the money just to look at it, good luck
My tank was rusty inside at the top, where it had been left without petrol to that level. Just surface stuff. I used a tank sealer. it was a bit...
Bung would not be much. Mileage and if the shims have been set up is the big cost. Belts is a fairly easy job. BTW this is an ST4s
Better than Rain ! Enjoy the trip. Keep the updates coming. Vosges is one of my target in the futire
+1 on my 2021 V4s. Being A modern bike I was expecting brutal brakes but these wr like a victoria spounge. My ST4s with new master and seal kit on...
Good Plan [ATTACH]
Lip was not great and thickness OK. Disc was on the bike for close on 24 years and 44K Miles
I should add I changed the rear disc too. Spot the cracks [ATTACH]
Yep its a Brembo and a rear pad
Something I have not seen before. I shall check the age of the pads and the make. In addition the brake pistons had crud on them that initially...
Not my experience with same bike and year. Try and pick up a Digital Multimeter (anywhere from 5 quid to 50) and check current draw. You shall...
Yes hope all is well!
UPDATE. A great offer from Andrew46 to weld up the broken strut was taken up and it worked. I took the opportunity to replace the seals and...
My St4s says 5nm...so finger tight. The tension on from the spring holds them in place.
Who did you get on with the OBDstar
These keep popping up on my IG https://arteviveearplugs.com/products/bluetooth-moto-earbuds Have not tried them, did not like the plugs when i...
My Dealer used to zip tie the connector. This looks like a good mod, but you may have to change the bikes wiring. One thjing that occured to me...
We have the start of a Chapter !
Anyone used this kind of thing and this make specifically https://www.ebay.co.uk/itm/326443567507
Hi Andrew, that is a very kind offer. I would be happy to take you up on that! I shall PM you? You are around 14mins by road away from me!
