Separate names with a comma.
Reinforcing one if the strongest materials in the world with something weaker isn't exactly what you do. It's done to sell cheap "carbon" parts....
Top company. Can't fault them.
As long as you have the original stuff and you didn't pay extra for the fake carbon you've done alright.
They are mix. One layer of carbon on the outside for looks and the rest of the panel is fibreglass. They look like very poor quality too.
I have a bag of rubber Ty wraps for sale. They're used but not perished. £25 posted in the UK [ATTACH]
Sold, thread can be closed please.
A set of brake calipers freshly refurbished. They were stripped, re-coated, had new seals, titanium bolts and bleed nipples. Even the location pin...
I have a set for sale. Missing one heel plate and brake lever. The parts are very very good and clean. No damage and in great shape for almost 30...
Sounds like a bearing in the gearbox is on the way out.
At 28 years old I don't complain. I may dismantle the loom this winter and repair it properly but then again, if it's ok now I might not repair...
I spliced a new pump feed into the loom after I connected the old feed back up and it fired straight up.
I have just found out where I went wrong and you're absolutely right. I had power coming from the relay but not arriving at the fuel pump. So I...
I'm after some ideas please. I have a sudden and unexplained lack of sparks on my 916. I try and be brief but some unlikely things are...
Difficult to know without seeing it. Obviously there is some fuel being returned from the pressure regulator but given your symptoms it's fuel...
Have a look through the filler cap. If you see a lot of fuel swirling around and or bubbles whilst the pump is priming it's most likely a perished...
Do you have a error code? Error fuel 16 seems a common one if the relay or pump fails. Do you hear the pump prime when you turn the ignition on?...
Last year I bought a 696 as a every day hack. I found the fork setup to be very hard, in particular with the deterioration of the roads near me. I...
If all else fails I like to use a bandsaw to cut through the throttle body or perhaps some carefully shaped explosives would work too.
They have resurfaced a road in the village where I live. It wasn't great but it's in the village and hardly used. Yes, a councillor does live...
You can put 2 short M3 or M4, can't remember, capheads in the side of the injector. There is a hole on either side. That gives you a place to grip...
