Separate names with a comma.
I use a Vodafone curve. It's not specific to bikes, it's just a key fob you can put anywhere. Very inexpensive. The only downside is battery life...
https://cohpro.com/product/fuel-hose-in-tank-7-3mm-id/ You need some of this inside the tank. About 35cm. I use this and it fits nice and snug....
Soak them in vinegar for a day or two. Gets rid of the oxide and you may be able to make a better judgement.
5/16 i.e. 8mm
Number of ports is irrelevant. All you need is one USB port.
I presume you talk about JPDiag? If so a Chromebook won't work. Needs to be windows based. It's a simple software so anything from Windows 7...
I bought some seals of powerhouse recently. I also had them re-coat the caliper bodies. They did a good job. To be honest it would have been not...
I'd say a magnet will tell you if it is Aluminium or not. I clean my tanks with normal white vinegar. Well I clean pretty much everything metal...
My oldest bike is 70 years and it does have European break down cover as well as all the others. Comes with the insurance.
Stating the obvious.... Your hose it too big. What ID is the old plastic hose? I bet it's 1/4 or 6mm and your rubber hose is 8mm or 5/16 which is...
It's the way Ti sheet looks when it's new of the roller. I don't know of a way to replicate that. Vapour blasting the sleeves would give a uniform...
I had a Sunbeam with a very similar issue. I found the throttle slide to be slightly worn allowing too much air past. Fixing that improved matters...
￡11.24 20%OFF | CNC Reverse Shifter Gear Shift Lever Peg For Ducati Monster 748 916 996 998 SuperSport 620SS 750SS 800SS 900SS 1000SS ST2 T3 T4...
The fuse is there to protect the circuit. So it depends on the wires. If they are thick enough you can up the fuse. Here is a guide for flexible...
I changed the fuse holder on my 916. It looks the same but is slightly different to the OEM as it has standard spade connectors. Makes it quite...
It's easy to check but I guarantee the problem is the thermistor in the tank. To check, disconnect the 4 pin plug at the bottom of the tank (best...
I would suggest your brake pedal hasn't got any free play and is leaning on the pushrod ever so slightly. When it all gets hot the master cylinder...
I can also make them in Silver now. Will be hallmarked 800 as per the original.[ATTACH]
They have ripped off lots of people on the MV Agusta forum. This was some time ago but they still advertise magnesium swing arms for thousands of...
You only need a bit from pump to filter and then from filter to outlet. The vent pipes don't seem to get affected by the ethanol and they are...
